1. Care after rain is very important: after a rainy day, it is important to wipe dry the wet parts in a timely manner, especially paying attention to wiping dry the accumulated water in the sliding groove. If the sliding groove is used for a long time, the friction will increase. You can add a small amount of engine oil or apply a layer of wax oil.
2. Attention for daily use: When cleaning zinc steel guardrails, do not step on the aluminum frame or hold the frame as support. Zinc steel can be soaked in clean water or neutral detergent with a soft cloth. Do not use regular soap and laundry detergent, and do not use strong acid and alkali cleaning agents such as detergent and toilet detergent.
3. Frequent inspection: Regularly inspect the connection parts of the zinc steel structure, tighten the bolts in a timely manner, and replace damaged parts. The vulnerable parts of aluminum alloy doors and windows, such as positioning pins, wind braces, and floor springs, should be checked regularly and lubricated regularly to ensure cleanliness and flexibility.
4. Prevent collision: This is a point that zinc steel products should pay attention to, and zinc steel products should be handled with care during the transfer process; The place where zinc steel products are placed should be a place where hard objects are not frequently touched; The ground on which zinc steel products are placed should also be kept flat, and the zinc steel guardrail should be firmly installed. If it is unstable, it will deform over time, affecting the service life of the zinc steel guardrail.
5. Regular dust removal: Dust is flying in the wild, accumulating over time, and a layer of floating dust will fall on the zinc steel equipment. It will affect the color of zinc steel, leading to damage to the protective film of zinc steel. Therefore, it is recommended to regularly scrub the outdoor zinc steel equipment, usually using soft software for cotton fabric cleaning.
6. Pay attention to moisture-proof measures: If it's just general outdoor air humidity, you can rest assured of the rust resistance of zinc steel guardrails. In case of heavy weather, dry cotton cloth should be used to wipe the water droplets on the zinc steel; If it rains, the water droplets should be wiped dry in a timely manner after the rain stops. Due to the severe acid rain in most parts of China, the remaining rainwater on the zinc steel should be immediately wiped dry after the rain.
7. Stay away from acid and alkali: Acid and alkali are the "number one killer" of zinc steel guardrails. If acid (such as sulfuric acid, vinegar) or alkali (such as methylamine, soapy water, or soda water) accidentally gets on the zinc steel guardrail, the dirty area should be immediately washed away with clean water and wiped dry with a dry cotton cloth.
8. Eliminating rust: If the zinc steel guardrail rusts, do not use sandpaper to polish it on yo
QQ客服